Robuste Glasklemme für Glas- und Blechfüllungen Die Glasklemme aus hochwertiger ZAMAK-Legierung ist ein essenzielles Konstruktionselement zur sicheren Befestigung und Stabilisierung von Glas- oder Blechfüllungen. Sie eignet sich hervorragend für den Einsatz in Geländern, Balkonen oder Treppen und gewährleistet eine feste und zuverlässige Integration der Füllung in die Gesamtkonstruktion. Mit ihrer pulverbeschichteten Oberfläche in elegantem Schwarz (RAL 9005) fügt sich diese Klemme nahtlos in moderne Architekturlösungen ein, die Funktionalität, Sicherheit und Ästhetik vereinen. Technische Details und Anwendung Material: Robuste ZAMAK-Legierung Oberflächengüte: Hochwertige Pulverbeschichtung Farbe: Schwarz (RAL 9005) Füllungen: Geeignet für Glas und Blech Glasstärken: Kompatibel mit 6 mm, 6,76 mm, 8 mm, 8,76 mm, 10 mm und 10,76 mm Blechstärken: Kompatibel mit 1,5 mm, 2 mm, 3 mm, 4 mm und 5 mm Montage: Speziell für Flachpfosten konzipiert (Modell 230P) Sicherheit und Flexibilität Diese Glasklemme sorgt für einen vollständigen Halt und eine effektive Sicherung gegen Herausfallen der Füllung. Die Grundsicherung erfolgt durch das Klemmgelenk, welches besonders bei oberer Verankerung empfohlen wird. Für erhöhte Sicherheit, insbesondere bei seitlicher Verankerung, kann die Klemme optional mit einem Sicherungsstift oder einem Sicherungsboden ergänzt werden. Bitte beachten Sie, dass die benötigten Dichtungen (je nach Glasstärke sind zwei Dichtungen erforderlich) sowie die Schraubverschlüsse nicht im Lieferumfang enthalten sind und separat erworben werden müssen.

Glass clamp Model 21 – Black RAL 9005 with a flat back The Model 21 glass clamp impresses with its modern design in deep black (RAL 9005) and its robust construction from ZAMAK alloy. Thanks to its flat mounting surface, this clamp is ideal for installation on square posts or other flat surfaces. It provides a secure hold for glass panels and metal sheets of various thicknesses – ideal for use on balconies, staircases or parapets. Features: Model: 21 – with flat back Material: ZAMAK alloy – sturdy, corrosion-resistant and durable Finish: Powder-coated in RAL 9005 (black) Suitable for: ESG/VSG glass or sheet metal Glass thicknesses: 1.5 mm, 2 mm, 3 mm, 6 mm, 6.76 mm, 8 mm, 8.76 mm, 10 mm, 10.76 mm Installation: Mounted on the side of a flat baluster or square tube Applications: The glass clamp is ideal for balcony railings, stair railings, glass balustrades and privacy screens. Thanks to its adjustable glass clamping mechanism and robust construction, it is suitable for both domestic and commercial projects in indoor and sheltered outdoor areas. Your benefits at a glance: ✔️ Modern design in RAL 9005 Black ✔️ High clamping force for a secure hold ✔️ Suitable for many glass thicknesses ✔️ Versatile and easy to install ✔️ Quality product from FeNau Examples of use The 45×45×27 mm glass clamp – flat connection, RAL 9005 Black – is highly versatile in modern metal and glass construction. Thanks to its flat rear, it is ideal for structures with flat profiles or square posts. Balcony railings: Secure fixing of glass panels to flat posts – for an elegant, transparent balustrade. Stair railings: Fixing of glass panels between posts indoors – modern design and high stability. Privacy screens: Installation of satin-finished or tinted glass elements as stylish privacy screens on patios or balconies. Indoor partition walls: Use in offices, showrooms or living spaces for fixing glass partitions. Balustrades on galleries: Discreet glass fixing for open galleries, stairwells or mezzanines. Shower screens: For bespoke glass screens with flat wall profiles in modern bathrooms (protected area). Thanks to the black powder coating in RAL 9005, the glass clamp complements dark metal structures and modern architectural styles particularly well. Order now and receive high-quality glass clamps directly from Germany – available for immediate delivery.

Glass clamp in a handy set of 4 This set contains four sturdy glass clamps of the 230P model, made from durable V2A stainless steel. The clamps feature a high-quality powder coating in black (RAL 9005), which not only ensures a modern and attractive appearance but also offers additional protection. They are ideal for mounting glass or sheet metal panels on flat posts or walls and are therefore versatile for use in railing construction. Technical details and compatibility The glass clamps are designed for a wide range of panel thicknesses, offering maximum flexibility for your projects. Secure fastening is achieved via a clamp connection. Product type: Glass clamp (Model 230P) Material: V2A stainless steel (AISI 304) Surface: Powder-coated Colour: Black (RAL 9005) Connection: For flat posts/walls Suitable glass thickness: 1.5 mm to 10.76 mm Comprehensive scope of delivery The set is supplied ready for installation and includes all the necessary screws for securing the clamps. Please note that the seals required for glass installation are not included and must be ordered separately depending on the selected glass thickness.

Glass holders in a handy set of four This set contains four sturdy glass holders, made from durable V2A stainless steel. The surface features a high-quality powder coating in deep black (RAL 9005), which not only offers a modern look but also provides additional protection against the elements. The holders are specially designed for mounting on round balusters with a diameter of 42.4 mm and are ideal for constructing stylish and safe railings for both indoor and outdoor use. Technical details at a glance Product type: Glass holder (glass clamp) Material: V2A stainless steel (AISI 304) Surface: Powder-coated Colour: Black (RAL 9005) Connection: For round tube with ø 42.4 mm Suitable glass thickness: 6 mm to 10.76 mm (suitable seals required) Fastening: Clamp connection with optional locking pin Application and installation The glass holders are ideal for securing glass, sheet metal or other panel materials. Thanks to the screw set supplied, quick and easy installation directly onto the baluster is possible. The semi-circular contact surface ensures a perfect and stable fit on the tube. Please note that the appropriate seals for your glass thickness must be ordered separately to ensure optimum hold and protection of the glass. Contents of the set 4x Glass holders Model 230P, black 8x countersunk screw A2 DIN7991 M6x16 8x PVC screw caps, black 4x pan-head screw A2 DIN 7380 M8x20

Glass Clamp Set for Stylish Glass Balustrades This set contains four high-quality Model 26 glass clamps, designed for the secure and elegant installation of glass panels on round balusters. Made from robust V2A stainless steel and finished with a durable, matt black powder coating (RAL 9005), these clamps offer a modern look and reliable hold. They are the ideal choice for constructing indoor and outdoor railings, for example on balconies, terraces or staircases. Technical details at a glance Product type: Glass clamp (Model 26) Material: V2A stainless steel (AISI 304) Surface: Powder-coated Colour: Black (RAL 9005) Connection: for round tube with Ø 42.4 mm Suitable glass thicknesses: 8 mm, 8.76 mm, 10 mm, 10.76 mm, 12 mm, 12.76 mm Fastening: Clamp connection (locking pin can be used optionally) Application and installation The glass clamps are ideal for securing glass, sheet metal or panel inserts. Installation is carried out by screwing them onto the post. The glass is securely held between the clamping jaws. Please note that the rubber seals suitable for your glass thickness are not included in the scope of delivery and must be ordered separately. The set contains all the necessary screws for installing the clamps.

Glass clamps in a handy set of four This set contains four robust glass clamps (model 25P), made from durable V2A stainless steel. The high-quality powder coating in deep black (RAL 9005) gives your railing or glass partition a modern and elegant look. The clamps are specially designed for mounting on flat surfaces such as square posts or walls and provide a secure and stable fixing for your glass panels. Technical details at a glance Material: Stainless steel (V2A / AISI 304) Surface: Powder-coated Colour: Black (RAL 9005) Mounting on: Flat surfaces Suitable glass thickness: 6 mm, 6.76 mm, 8 mm, 8.76 mm, 10 mm, 10.76 mm, 12 mm, 12.76 mm Model: 25P Versatile applications Whether for balcony railings, stair railings, patio enclosures or as a mounting for wind and privacy screens – these glass clamps are extremely versatile. The corrosion-resistant properties of V2A stainless steel make them the ideal choice for both indoor and outdoor use. The set comes with the appropriate screws and cover caps, enabling quick and neat installation. Contents of the set 4x glass clamps (unassembled) 8x A2 DIN 7991 M6x16 screw 8x PVC cover caps in black 4x A2 DIN 7380 M8x20 screw Important note: The rubber seals required for assembly are not included in the scope of delivery. Please order these separately according to your chosen glass thickness.

Glass clamp for glass and sheet metal panels, in a handy set of four This set contains four robust 200P model glass clamps, designed for the secure installation of infills on flat surfaces such as square posts or walls. The clamps are made from durable V2A stainless steel and feature a high-quality powder coating in deep black (RAL 9005). This finish not only gives your railing a modern, matt look, but also reliably protects the material from the elements. Technical details and compatibility The clamp holders are extremely versatile and suitable for a wide range of panel thicknesses. They can be used for both glass and sheet metal. Material: V2A stainless steel (AISI 304) Surface: Powder-coated Colour: Black (RAL 9005) Mounting: For flat posts / wall mounting Suitable glass thicknesses: 6 mm, 6.76 mm, 8 mm, 8.76 mm, 10 mm, 10.76 mm Suitable sheet thicknesses: 1.5 mm, 2 mm, 3 mm Areas of application and installation instructions The glass clamps are the ideal choice for constructing modern balcony and stair railings, partitions or balustrades for both indoor and outdoor use. The set is supplied with the necessary fixing screws and matching cover caps, ensuring straightforward installation. Please note that the gaskets suitable for your glass thickness are not included and must be ordered separately.

Glass Clamp Set for Stylish Glass Installation This set comprises four high-quality glass clamps, specially designed for the secure and aesthetically pleasing fixing of glass or panel inserts to flat surfaces. Made from robust V2A stainless steel and finished with a durable powder coating in deep black (RAL 9005), these clamps blend seamlessly into modern construction projects. They are ideal for use on railings, balustrades or partition walls in both indoor and outdoor settings. Technical details at a glance Product type: Glass clamp (Model 26) Material: V2A stainless steel (AISI 304) Surface: Powder-coated Colour: Black (RAL 9005) Connection: For flat posts / flat surfaces Suitable glass thickness: 8 mm, 8.76 mm, 10 mm, 10.76 mm, 12 mm, 12.76 mm Flexible installation and application The glass holders offer flexible installation options depending on safety requirements. They can be used as a simple clamp connection, in combination with a safety pin, or with an additional safety plate to reliably prevent the glass pane from falling out. This makes them a safe choice for a wide range of applications such as balcony railings, staircases or terrace enclosures. Important note: The seals suitable for your glass thickness are not included in the scope of delivery and must be ordered separately. Comprehensive scope of delivery The set is supplied ready for assembly and contains all the necessary screws for straightforward installation: 4x glass clamp, black 8x A2 DIN7991 M6x16 screws 8x PVC screw covers, black 4x A2 DIN7380 M8x20 screw

Glass clamp set for stylish glass balustrades This set contains four robust glass clamps, specially designed for mounting on round balusters with a diameter of 42.4 mm. Made from durable V2A stainless steel and finished with a hard-wearing powder coating in deep black (RAL 9005), these glass clamps offer a secure yet aesthetically pleasing solution for your building project. They are ideal for use with glass balustrades on balconies, terraces or staircases and lend a modern look to any project. Technical details at a glance Product type: Glass clamp (Model 25P) Material: V2A stainless steel (AISI 304) Finish: Powder-coated Colour: Black (RAL 9005) Connection: For round tube Ø 42.4 mm Suitable glass thicknesses: 6 mm, 6.76 mm, 8 mm, 8.76 mm, 10 mm, 10.76 mm, 12 mm, 12.76 mm Installation and contents The set is supplied ready for assembly and includes all necessary screws for fixing the clamps to the post and securing the glass. Depending on requirements, the glass can be secured using a simple clamp connection, a clamp connection with a locking pin, or an additional locking plate. The scope of delivery includes 4 glass clamps, the corresponding screws and matching PVC cover caps. Please note that the rubber seals are not included in the scope of delivery and must be ordered separately according to your chosen glass thickness.

Glass clamps in a handy set of four This set contains four high-quality 200P glass clamps, ideal for the secure and stylish installation of glass or panel infills on railings. Made from durable V2A stainless steel and finished with an elegant black powder coating (RAL 9005), these brackets offer a modern look and reliable corrosion protection. They are specifically designed for attachment to round balusters with a diameter of 42.4 mm. Technical details at a glance Product type: Glass clamp / Glass holder Material: V2A stainless steel (AISI 304) Surface: Powder-coated Colour: Black (RAL 9005) Connection: For round tube with Ø 42.4 mm Suitable glass thicknesses: 6 mm to 10.76 mm (suitable seals required) Application and installation The glass clamps are ideal for indoor and outdoor use, for example on balcony, patio or stair railings. They are installed by screwing them onto the post. The set is supplied unassembled and includes all the necessary screws for assembly and fixing. Please note that the appropriate seals for your glass thickness must be purchased separately to ensure optimum hold. Contents of the set 4x Model 200P glass clamp, black 8x A2 DIN7991 M6x16 screw 8x PVC cover caps, black 4x A2 DIN 7380 M8x20 screws for post mounting