Ø 40 mm
// Robuste Glasbefestigungen für moderne Architektur mit transparenter Wirkung.
Filter products
-
pipe connector
- Malleable cast iron pipe fittings | T-pieces
- Malleable cast iron pipe connectors | Elbows
- Malleable cast iron pipe fittings | Cross pieces
- Malleable cast iron pipe connectors | Wall brackets / Base plates
- Malleable cast iron pipe connectors | Handrails
- Malleable cast iron pipe connector | Adjustable angle
- Ductile iron pipe connectors | Clamping rings / Flanges
- Ductile iron pipe connectors | Elbows
- Malleable cast iron pipe connectors | Extension pieces
- Malleable cast iron pipe coupling | Variable diameter
- Malleable cast iron pipe connectors | Accessories
-
Stainless steel components
- Plate holder
- Glass and panel holders
- Glass clamps
- Glass balustrade
- Glass holder
-
Stainless steel railing
- Cover plates | Post caps
- Anchor plates
- Spacers
- Balustrade posts | Post fixings
- Handrail bracket
- Handrail supports
- mounting plate
- Support pins for handrail brackets
- carrying handle
- LED stainless steel handrail
- Crossbar bracket
- pipe plug
- Post caps
- Klöpper heads, stainless steel
- Ronden
-
pipe bend
- 90-degree elbow (welded fittings, Type 3 DIN)
- 45-degree elbow (welded fittings, type 3 DIN)
- 180-degree elbow (welded fittings, Type 3 DIN)
- 90-degree elbow (welded fittings, Type 2 DIN)
- 90-degree elbow (welded fittings, type 5)
- Elbows, special angles, welded fittings
- 90-degree elbow weld fittings
- T-piece welded fittings
- Connector for welded fittings
- Cross fittings
- Connectors
- Trim parts
- Wall anchor | Floor anchor
- Clamping profile
- Glass and door systems
- Balls | Cones | Cubes
- Stainless steel tubes | Bar stock
- Grooved pipes
- Push-fit fittings / End caps for grooved pipes
- Home | Garden
- Door construction | Door locks | Door handles
- Stainless steel cables | Cable clamps | Accessories
- Marine | Boat supplies
- Accessories | Screws | Adhesives
- Exhibition stand construction
- Black Lane – Powder-coated stainless steel parts
- Sliding glass door
- BRENK-fix® Base Holder
-
wrought iron
- Caps
- Anchor plates
- Weld-on strips
- Weld-on brackets
- Baroque programme
- letters
- Drive-in plug
- Flat-rolled steel, unworked
- Handrail brackets + accessories
- House numbers
- balls
- Plastic handrails
- Rings | Crosses
- Ronden
- Locks | Door handles | Other accessories
- Bar stock
- pipe bend
-
Door hinges
- Gate hinge with welded sleeve
- Door hinge with slotted plate
- Door hinge with a long thread
- Door hinges, 4-way adjustable
- Self-closing gate hinges
- Threaded sleeves for gate hinges – spares & accessories
- with a weld-on plate
- Up-and-over door fittings
- Adjustable wall plates for gate hinges
- Brass washers for hot-dip galvanised gate hinges
- Eye bolts, sold individually, for gate hinges
- for embedding in concrete
- with a hinged flap
- with a wall plate
- Fence posts
- fence posts
- Decorative strips
- Enamel and paints
- Blacksmithing Basic Line
-
Grating steps
-
Grating
-
Marine | Boat accessories
-
Sliding gate fittings
- Sliding gate fitting 0 | Gate weight per leaf up to 90 kg
- Sliding gate fitting 1 | Gate weight per leaf up to 200 kg
- Sliding gate fitting 2 | Gate weight per leaf up to 400 kg
- Sliding gate fitting 3 | Gate weight per leaf up to 600 kg
- Sliding gate fitting 4 | Gate weight per leaf up to 1200 kg
- Sliding gate fitting 5 | Gate weight per leaf up to 2000 kg
- Full range
- Fits all sizes 1 to 5
- Cast iron rollers for sliding gates
- New arrivals
- Neon sign
-
Sealing plugs and protective caps
Filter products
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 1-2 Werktage
The design favourite: Ø 40 mm glass spotlights in a complete set
Design is a question of proportions. Our Ø 40 mm glass point holder is therefore the first choice for architects and builders who value a harmonious look. With its diameter, it sits almost exactly in line with standard 42.4 mm balusters – the result is a flowing, flush aesthetic that appears neither too delicate (like 30 mm) nor too bulky.
In addition, the 40 mm plate offers an enlarged clamping surface. This protects your glass through better pressure distribution and ensures greater stability during installation.
Everything included: our all-inclusive set
So that you don’t have to search for small parts on site, we supply this bestseller as a ready-to-assemble set as standard:
- ✅ 1x stainless steel body: Solid upper and lower sections (Ø 40 mm).
- ✅ 1x rubber set included: The appropriate soft mounts to protect the glass.
- ✅ 1x M8x45 threaded pin: The correct fastener is already included.
A wide range of connections for every situation
No matter what you’re attaching it to – we have the right connection. Simply select your option from the menu:
- Flat connection: For straight walls, square tubes or masonry.
- Pipe connection (for Ø 42.4 mm): With a radius on the back for a perfect fit on round railing posts.
👨🔧 For individualists: The calculation formula
Do you have a special installation situation, an unusual glass thickness, or would you like to customise the bracket? If you want to change the threaded pin or check the length, use our Fenau formula to determine the minimum length.
= minimum length of threaded pin
Note: "B" refers to the dimension of the base body/threaded engagement (see technical drawing). This formula ensures that the pin engages deeply enough to guarantee full holding force.
Choose the 40 mm glass point holder from Fenau – as a handy set for quick installation or as a flexible basis for your customised planning.