Glass
// Das Herzstück jedes Glasvordachs – robustes Glas mit klarer Optik.
Filter products
-
pipe connector
- Malleable cast iron pipe fittings | T-pieces
- Malleable cast iron pipe connectors | Elbows
- Malleable cast iron pipe fittings | Cross pieces
- Malleable cast iron pipe connectors | Wall brackets / Base plates
- Malleable cast iron pipe connectors | Handrails
- Malleable cast iron pipe connector | Adjustable angle
- Ductile iron pipe connectors | Clamping rings / Flanges
- Ductile iron pipe connectors | Elbows
- Malleable cast iron pipe connectors | Extension pieces
- Malleable cast iron pipe coupling | Variable diameter
- Malleable cast iron pipe connectors | Accessories
-
Stainless steel components
- Plate holder
- Glass and panel holders
- Glass clamps
- Glass balustrade
- Glass holder
-
Stainless steel railing
- Cover plates | Post caps
- Anchor plates
- Spacers
- Balustrade posts | Post fixings
- Handrail bracket
- Handrail supports
- mounting plate
- Support pins for handrail brackets
- carrying handle
- LED stainless steel handrail
- Crossbar bracket
- pipe plug
- Post caps
- Klöpper heads, stainless steel
- Ronden
-
pipe bend
- 90-degree elbow (welded fittings, Type 3 DIN)
- 45-degree elbow (welded fittings, type 3 DIN)
- 180-degree elbow (welded fittings, Type 3 DIN)
- 90-degree elbow (welded fittings, Type 2 DIN)
- 90-degree elbow (welded fittings, type 5)
- Elbows, special angles, welded fittings
- 90-degree elbow weld fittings
- T-piece welded fittings
- Connector for welded fittings
- Cross fittings
- Connectors
- Trim parts
- Wall anchor | Floor anchor
- Clamping profile
- Glass and door systems
- Balls | Cones | Cubes
- Stainless steel tubes | Bar stock
- Grooved pipes
- Push-fit fittings / End caps for grooved pipes
- Home | Garden
- Door construction | Door locks | Door handles
- Stainless steel cables | Cable clamps | Accessories
- Marine | Boat supplies
- Accessories | Screws | Adhesives
- Exhibition stand construction
- Black Lane – Powder-coated stainless steel parts
- Sliding glass door
- BRENK-fix® Base Holder
-
wrought iron
- Caps
- Anchor plates
- Weld-on strips
- Weld-on brackets
- Baroque programme
- letters
- Drive-in plug
- Flat-rolled steel, unworked
- Handrail brackets + accessories
- House numbers
- balls
- Plastic handrails
- Rings | Crosses
- Ronden
- Locks | Door handles | Other accessories
- Bar stock
- pipe bend
-
Door hinges
- Gate hinge with welded sleeve
- Door hinge with slotted plate
- Door hinge with a long thread
- Door hinges, 4-way adjustable
- Self-closing gate hinges
- Threaded sleeves for gate hinges – spares & accessories
- with a weld-on plate
- Up-and-over door fittings
- Adjustable wall plates for gate hinges
- Brass washers for hot-dip galvanised gate hinges
- Eye bolts, sold individually, for gate hinges
- for embedding in concrete
- with a hinged flap
- with a wall plate
- Fence posts
- fence posts
- Decorative strips
- Enamel and paints
- Blacksmithing Basic Line
-
Grating steps
-
Grating
-
Marine | Boat accessories
-
Sliding gate fittings
- Sliding gate fitting 0 | Gate weight per leaf up to 90 kg
- Sliding gate fitting 1 | Gate weight per leaf up to 200 kg
- Sliding gate fitting 2 | Gate weight per leaf up to 400 kg
- Sliding gate fitting 3 | Gate weight per leaf up to 600 kg
- Sliding gate fitting 4 | Gate weight per leaf up to 1200 kg
- Sliding gate fitting 5 | Gate weight per leaf up to 2000 kg
- Full range
- Fits all sizes 1 to 5
- Cast iron rollers for sliding gates
- New arrivals
- Neon sign
-
Sealing plugs and protective caps
Filter products
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 3-5 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Available, : Lieferzeit 1-2 Werktage
Glass used in glass canopies plays a load-bearing role – in the truest sense of the word. As overhead glazing, it must meet the highest standards of safety, stability and weather resistance. In this category, you will find high-quality safety glass that is specifically designed for use in self-supporting and suspended glass canopies.
Safety glass for maximum stability
Laminated safety glass (LSG) is generally used for glass canopies. This consists of two glass panes permanently bonded together by a tear-resistant film. Tempered glass (TG) is often used for this purpose, as it offers significantly greater strength than standard float glass.
In the event of damage, the glass fragments remain adhered to the laminated film. This prevents glass splinters from falling – a crucial factor for overhead glazing in entrance areas.
- Laminated safety glass made from TVG for enhanced safety
- Suitable for overhead glazing
- High residual load-bearing capacity
- Splinter protection provided by the interlayer film
- Weather and UV resistant
Designed for self-supporting and suspended systems
The glass for glass canopies is precisely tailored to the specific structure. In a self-supporting glass canopy, the load is transferred directly into the wall via the profile. Here, the correct glass thickness is particularly important to reliably withstand snow and wind loads.
In the case of suspended glass canopies with tension rods, the load is additionally distributed via the bracing. Here too, the safety glass must fit the structure precisely to ensure long-term stability.
Different glass thicknesses are available depending on the projection and system. The selection depends, among other things, on:
- The projection of the canopy
- Width of the glass surface
- Snow load zone
- Fixing system
Aesthetics meet functionality
In addition to technical safety, aesthetics also play a key role. Transparent glass surfaces create a bright, open entrance area. Polished and ground glass edges emphasise the high-quality finish and complement modern stainless steel profiles perfectly.
The clean design blends harmoniously into contemporary architecture – whether a detached house, block of flats or commercial property.
Durable and low-maintenance
Laminated safety glass for glass canopies is extremely resistant to weather conditions such as rain, frost, UV radiation and temperature fluctuations. The glass surface is low-maintenance and easy to clean, ensuring your canopy retains its high-quality appearance over time.
Glass for glass canopies at fenau.eu stands for certified safety, long-lasting quality and precise adaptation to your canopy system. This provides you with the ideal foundation for a stable and aesthetically pleasing canopy over your entrance area.